- Forum
- categories
- Sanitation systems
- Treatment of wastewater, sludges, organic waste, excreta
- Septic tanks (conventional or upgraded)
- Dutch Septic Tank, DST - without concrete!
Dutch Septic Tank, DST - without concrete!
17.1k views
![](/templates/protostarsusanawebmix/images_forum/large-icons/33.jpg)
"simple" Sanitation-Solutions by gravity
Low-Tech Solutions with High-Tech Effects
"Inspired by Circular Economy and Cooperation"
www.flickr.com/photos/aqua-verde/
Please Log in to join the conversation.
You need to login to replyIt seems the design you posted is a rigid plastic tank like structure, that can probably be installed underground without any lining of the pit, as you say. The start of this thread was another design, which is more like a plastic bag, for which some of us feel the pit should be lined with stones.
Two brief questions:
1.) Is the septic tank you posted made locally (in Kenya?)
2. How does it compare cost wise with a brick/concrete structure?
Regards
Marijn
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Please Log in to join the conversation.
You need to login to reply- ande1978
-
- Independent Ecological Sanitation Consultant in Kenya
Less- Posts: 16
- Karma: 1
- Likes received: 2
I want to attach a picture of the given plastic PVC solution - to share with you.
Actually, the company states that this solution must not be lined in a brick framework. Instead just to be positioned in the soil and covered. It will redirect greywater into a soak pit.
currently acting as Project Manager in Sanitation for "Offene Herzen e.V. - open hearts" in Chwele/Western Kenya
Master in Business Engineering
Longing for a detailed review of the UN MDG achievements after 2015 with rectifying post-MDG goals
Mobile: +254708617662
Location: Kiminini (Kitale), Kenya
Attachments:
-
septichoriz028.jpg (Filesize: 47KB)
Please Log in to join the conversation.
You need to login to replySome comments on the various entries above.
Some disadvantages I would see for the plastic bag septic tank:
1.) Import duties and international transport may make it expensive.
2.) If the material for the bags is PVC (as with the plastic bag biogas plants), this means it is a very polluting material to produce and later (probably) burn.
3.) I agree that the pit for it may need to be lined / supported to prevent caving in. For Nepal, for example, I think this can be done with stones using clay as mortar. This will mean no cement is needed, which will save a lot of costs. In rural Nepal, stones are often available for free from field clearings.
Some other comments:
From my experience with biogas, most of the cracking problems with brickwork seem to come either from using bricks that are not fully baked (and thus shrink), from using low quality sand (river sand can have too much clay) and from not letting the cement cure slowly enough. The last can be partially prevented by wetting out the cement and bricks after the building of the walls for one or two days. Using dry bricks is also a bad idea, soaking them in water first is necessary to improve the bond with the cement.
In Nepal we make the concrete done of biogas plants gas tight using waterproof emulsion paint instead of the system described by TED,. This also seems to work and is less work.
Regards
Marijn
E: This email address is being protected from spambots. You need JavaScript enabled to view it.
Please Log in to join the conversation.
You need to login to replyYou may go for the know-how to get rural biogas digester gas tight too, with a hot oil wax mixture:
See Open Source manual of Christopher Kellner at:
www.ted-biogas.org/assets/html_standalon...odigester_Lesoho.htm
Three parts engine oil and one part candle wax are heated and mixed. In the digester the gastight part is marked with charcoal in sections of 10 * 20 cm. With the help of a hot air blower or a blow torch a marked section of the wall is heated until it is dry and the hot oil wax mixture is applied by a second person with a brush. It is required to take a charcoal burner down in the digester. The heated plaster will absorb the oil-wax mixture into its capillary and provide long-term gas tightness. This has to be done carefully with the entire surface, which is expected to be gastight.
All the Best
Detlef
"simple" Sanitation-Solutions by gravity
Low-Tech Solutions with High-Tech Effects
"Inspired by Circular Economy and Cooperation"
www.flickr.com/photos/aqua-verde/
Please Log in to join the conversation.
You need to login to replyI suggest you have a look at solutions invented to prevent leaking in (underground) rain-water harvesting tanks as there it is recognized as an issue that needs to be fixed.
I agree that concrete brick combinations are not so optimal, especially as the concrete is harder than the burned bricks, resulting is cracks mainly in the brick-work (see also brick house construction where that is an structural issue that is hard to repair).
I think an interesting approach is to work with quality assured and properly cured interlocking pre-made concrete plates or real lime plaster instead. See the attached document for some details.
Lime has the advantage that it is softer than the bricks and thus cracks itself first, but has "self-healing" properties as the slow curing process takes years. It is also easier to work with as you don't have to work in one quick go as in the case of concrete.
You need to think about the water permeability though, as lime is even more permeable then concrete (without water-proofing additives). A traditional technique to water-proof lime is called " tadelakt ", but I am not sure how compatible that would be to a septic tank.
This message has an attachment file.
Please log in or register to see it.
Please Log in to join the conversation.
You need to login to reply- ande1978
-
- Independent Ecological Sanitation Consultant in Kenya
Less- Posts: 16
- Karma: 1
- Likes received: 2
So which one is long-lasting? Manufacturers of the plastic solution here in Kenya promote a lifespan of about min 30 years.
Regards,
Andreas
currently acting as Project Manager in Sanitation for "Offene Herzen e.V. - open hearts" in Chwele/Western Kenya
Master in Business Engineering
Longing for a detailed review of the UN MDG achievements after 2015 with rectifying post-MDG goals
Mobile: +254708617662
Location: Kiminini (Kitale), Kenya
Please Log in to join the conversation.
You need to login to replyPossible advantages on one side have often disadvantages on the other side...
E.g. a project which emphasis on local job creation have to go for mason work not for any prefab's made by larger entrepreneurs often far away in towns.
#5226 (Biogas from ABR)
" The capturing of gas from brick made digesters is depending very much on the quality of plastering workman ship, which is often changing. Keeping this in mind I agree, it is much more difficult to get the ABR compartments real gas-tight. Therefor using prefab fiberglass systems seems to me will have at least an advantage to this problem, but will be to the disadvantage of local workers."
#5220
"I recommend the prefab ... to save time and have more assurances in quality management during construction and operation & maintenance."
Best Regards,
Detlef
"simple" Sanitation-Solutions by gravity
Low-Tech Solutions with High-Tech Effects
"Inspired by Circular Economy and Cooperation"
www.flickr.com/photos/aqua-verde/
Please Log in to join the conversation.
You need to login to replyAquaVerde wrote: In the same way small improved septic tanks (ABRs) could be constructed without concrete...
Hi Detlev,
some more sceptism
![;) ;)](/media/kunena/emoticons/wink.png)
I don't know about exact cost advantages of the plastic material. But even if concrete or brickwork are a bit more expensive, these materials are normally locally available, while for the plastic septic tank or ABR, you need a supply chain to develop first. Also concrete or brickwork gives more work to local masons. So I am not convinced that there are huge advantages of replacing concrete by plastic in contexts with low resources...
Best Florian
Please Log in to join the conversation.
You need to login to replyIn comparison to the size of the near toilet building this Dutch septic tank seems to me very shallow, different to their latrine bag. On top it looks like a wooden frame. I like the black cover to increase temperature inside the shallow septic tank. Maybe this solution is in a dense populated area not favorable, but in an open spacy area without many human traffic it seems to me ok. But the drainage seems to me a bit too close to the ditch, I would prefer more distances. I hope the Dutch organization will have an input on our skeptics about.
In the same way small improved septic tanks (ABRs) could be constructed without concrete...
Best Regards,
Detlef
"simple" Sanitation-Solutions by gravity
Low-Tech Solutions with High-Tech Effects
"Inspired by Circular Economy and Cooperation"
www.flickr.com/photos/aqua-verde/
Please Log in to join the conversation.
You need to login to reply… again I´m skeptical about the structure, especially when you have high water tables. So my impression is that these products are not tested that much …but I might be wrong.
Yours
Christoph
Please Log in to join the conversation.
You need to login to replystill sceptical. If free-standing, I can imagine it works. But underground, with earth refilled, I don't think this is stable without further structural support, especially when the tank is empty (desludging).
Best, Florian
Please Log in to join the conversation.
You need to login to reply- Forum
- categories
- Sanitation systems
- Treatment of wastewater, sludges, organic waste, excreta
- Septic tanks (conventional or upgraded)
- Dutch Septic Tank, DST - without concrete!