Aerobic biodegradability test

4588 views

Page selection:
  • Yvonne
  • Yvonne's Avatar
    Topic Author
  • A FSM enthusiast fortunate to work in areas of sanitation with Water For people
  • Posts: 4
  • Likes received: 2

Re: Aerobic biodegradability test

Thanks alot, this was helpful. I chose not to use the aerobic biodegradability test that is used by the UKZN team as i thought it was an exaggeration and these conditions do not actually hAPPEN IN A PIT LATRINE so instead i am looking at the long term effect of the aerobic and anaerobic degradadtion in the pit latrines

Please Log in to join the conversation.

You need to login to reply
  • biotech80
  • Off-Grid Sanitation Solutions - Faecal Sludge - - DEWATS - - Water Footprint Reduction -
  • Posts: 5
  • Likes received: 1

Re: Aerobic biodegradability test

Hello,

Could you tell me about the procedure you intend to use for the aerobic biodegradability test?

We at the Pollution Research Group at UKZN are using an aerobic biodegradability test to save a lot of time and to see the fractions of the biodegradability (rapidly biodegradably, highly biodegradable until slow/nonbiodegradable)
We measure the oxygen uptake rate of the aerobic sludge after adding the wastewater/faecal sludge.

Coming to your question of comparability between anaerobic and aerobic biodegradability:

The vast amount of the biodegradable fractions are comparable, however, you would have to trace substances with anaerobic inhibition effects.
In my case: caprylic acid Highly degradable aerobicly, but inhibits anaerobic microorganisms.

Regards
Bjoern

Please Log in to join the conversation.

You need to login to reply
  • JKMakowka
  • JKMakowka's Avatar
  • Just call me Kris :)
  • Posts: 1044
  • Karma: 35
  • Likes received: 359

Re: Aerobic biodegradability tes

May I ask what you need these details for?

Technically BOD5 or something like that is of course closer to "biodegradability", but it takes much longer (5 days ;) ) to measure than COD and will underestimate the degradation in a pit which is obviously much longer in duration.

COD gives you a estimate of the (nearly) total potential to be oxidized, i.e. the end result of a long aerobic degradation process.

COD should over-estimate the degradation a bit as the chemical oxidant used is more aggressive than aerobic biological degradation, which in turn is more complete than anaerobic degradation.

Any quick lab test will be a rough estimate and COD is pretty good for that. If you want something "better", measure it in the actual pit (easier said then done, I know ;) ).

Please Log in to join the conversation.

You need to login to reply
  • Yvonne
  • Yvonne's Avatar
    Topic Author
  • A FSM enthusiast fortunate to work in areas of sanitation with Water For people
  • Posts: 4
  • Likes received: 2

Aerobic biodegradability test

Hello,
I am intending to use the aerobic biodegradability test for a study on sludge accumulation in pit latrines.
However there are some things i do not understand,
1. Why measure COD if it is a biodegradability test?
2. Since it is aerobic with use of saturated air, how do i account for the anaerobic processes that take place in the pit latrine?
3. Is there a better test that can account for the degradation that takes place in the pit latrine?
Thank you

Please Log in to join the conversation.

You need to login to reply
Page selection:
Share this thread:
Recently active users. Who else has been active?
Time to create page: 0.060 seconds
Powered by Kunena Forum