pH fixing in a containerized biogas plant

525 views

Page selection:
  • prakasamtata
  • Posts: 2
  • Likes received: 0

Re: Reply: pH fixing in a containerized biogas plant

Yes, the pH of the slurry coming out of the biogas plant is indicative of the pH of the digester contents. What is the balloon made of. After finding out the storage balloon go a good hardware store and get their advice for a glue that will be able repair and patch the hole with a piece of the material that the ballon is made of. Good luck.

Best wishes, Prakash

Dr Prakasam Tata, Ph.D., BCES, QEP (Emeritus), WEF Fellow Executive Director, Center for the Transformation of Waste Technology Naperville IL 60540 USA www.ctwt. <www.ctwt.org>us

President, Bharathi Theertha Naperville, IL 60540 USA www.bharathitheertha.org

Honorary Professor Department of Environmental Science, Environmental Engineering, and Management Andhra University, Visakhapatnam, A.P. India

1213 Stonebriar Court Naperville, IL 60540 USA

Tel: 630-848-1933 WhatsAp: +1 630-915-6318 Fax: 630-848-1934 e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Please Log in to join the conversation.

You need to login to reply
  • Vijay
  • Topic Author
  • Posts: 1
  • Likes received: 0

pH fixing in a containerized biogas plant

Dear Members,

We are an NGO operating a containerized biogas plant in one location in Bangalore, India. For some months the biogas is not being produced. We thought reasons such as the baloon which stores biogas may have got punctured due to rat bite or some reasons. 
What could be the glue material to repair the puncture if found. 

Also I would like to know how to capture pH value at multiple locations inside the container so as to check if the container pH is conducive to Biogas production.
Since it's anaerobic tank there is no provision to take effluent sample. Is it sufficient to take outlet slurry/ leachate and that gives a comprehensive pH ?

Kindly guide.

Thanks
Vijay

Please Log in to join the conversation.

You need to login to reply
Page selection:
Share this thread:
Recently active users. Who else has been active?
Time to create page: 0.182 seconds
Powered by Kunena Forum