Transfer Tanks in dense slum area - for pit latrine waste in dense settlements of Nairobi - dewater in a mobile manner?

  • nicolag
  • nicolag's Avatar
    Topic Author
  • Sanitation Engineer - Consultant
  • Posts: 28
  • Karma: 2
  • Likes received: 9

Transfer Tanks in dense slum area

Hi All

I am working on a project to trial transfer stations for primarily pit latrine waste in dense settlements of Nairobi. We are hoping to acquire a new site at the drain where the manual emptiers already bring their waste at a rate of approx 10m3/day. We are finding ~5% solids.

In order to build some trust with local officials, we'll be first running a basic transfer station model where we collect the waste in a tank, and exhaust. Though over time, we would like to dewater on site; and ideally send liquids to the sewer network (in an ideal world we might just dump all of the waste in there after some screening).

The sewer network is unpredictable in its function so in the near term (and maybe beyond) it would be preferable to deal with the liquids on site. Though this quite a swampy area with a dense population. That said, we may manage to acquire ~30m2+ for our set-up and the existing site is at a bit of a distance to the surrounding communities (~500m).

It may also be of interest to dewater in a mobile manner and transport the liquids to a functioning sewer (subject to lots of negotiation of course!)

I know that space constraints will mean expensive solutions to dewatering and effluent disposal; but I am interested to hear them...if you have any that are tried and tested. I am looking at some package treatment plants but struggling to decipher one from another and ascertain how they will deal with our relatively potent faecal sludge.

Apologies for the rather vague problem statement but I don't want to rule out any options just yet!

Many thanks,

You need to login to reply
  • awhitesell
  • awhitesell's Avatar
  • Beaumont managed the Fecal Sludge Omni-Ingestor project on behalf of the Bill and Melinda Gates Foundation between October 2011 and November 2015, and has been developing FSM technology since 2011.
  • Posts: 33
  • Karma: 5
  • Likes received: 7

Re: Transfer Tanks in dense slum area

Hi Nicola,

This is an interesting project you are working on and conceptually similar to something I explored on paper but didn't turn into a project (due to a lack of funding, not because of some fundamental issue with the concept). It seems to me that disposing of 10 cubes of 5% solid waste into the sewer network won't be a major burden on the WTP although you should check with plant and also see if the infrastructure between the access point and the WTP can handle it. As you suggest, skipping the dewatering would be ideal as that step will prove to be the most challenging technology-wise. As I'm sure you are aware, the physio-chemical properties of the pit contents can vary quite a bit -
and dewatering equipment works best when the incoming material has consistent properties. Dewatering of the sludge, and more specifically, dosing of the polymers used to cause flocculation, will be your biggest technical challenge.

If you visit our old website, , you'll see some of the concepts we were considering/developing within the Omni-Ingestor program. The Fixed Pre-Processor is similar in principle to your platform, and the original Omni-Ingestor concept, the Mobile Pre-Processor is similar to your mobile platform idea except that it also includes pit/tank evacuation.

I'm happy to talk with you more about the project if you like.



Andrew Whitesell
Founder/Owner of Beaumont
The following user(s) like this post: muench
You need to login to reply
Share this thread:
Recently active users. Who else has been active?
Time to create page: 0.969 seconds